Need help fitting L4 missions and incursion

[Lupus Coelestis]

Hi everyone. I am an old player returning to the game, I am a little bit mixed up with the fitting. I would like to participate in L4 missions and incursions fleet. I am Caldary i can fly any BS and I own a Tengu.

Here id the fitting for my Tengu:

<shipType value="Tengu"/>
<hardware slot="med slot 1" type="Cap Recharger II"/>
<hardware slot="med slot 4" type="Kinetic Shield Hardener II"/>
<hardware slot="med slot 5" type="Thermal Shield Hardener II"/>
<hardware qty="5566" slot="cargo" type="Scourge Rage Heavy Assault Missile"/>
<hardware slot="low slot 0" type="Caldari Navy Ballistic Control System"/>
<hardware slot="low slot 1" type="Caldari Navy Ballistic Control System"/>
<hardware slot="med slot 2" type="Corelum C-Type 10MN Afterburner"/>
<hardware slot="med slot 0" type="Gistum C-Type Medium Shield Booster"/>
<hardware slot="low slot 2" type="Ballistic Control System II"/>
<hardware slot="med slot 3" type="Shield Boost Amplifier II"/>
<hardware slot="med slot 6" type="Shield Boost Amplifier II"/>
<hardware qty="3000" slot="cargo" type="Nova Rage Heavy Assault Missile"/>
<hardware slot="hi slot 0" type="Heavy Assault Missile Launcher II"/>
<hardware slot="hi slot 1" type="Heavy Assault Missile Launcher II"/>
<hardware slot="hi slot 2" type="Heavy Assault Missile Launcher II"/>
<hardware slot="hi slot 3" type="Heavy Assault Missile Launcher II"/>
<hardware slot="hi slot 4" type="Heavy Assault Missile Launcher II"/>
<hardware slot="hi slot 5" type="Heavy Assault Missile Launcher II"/>
<hardware slot="rig slot 0" type="Medium Hydraulic Bay Thrusters I"/>
<hardware slot="rig slot 2" type="Medium Hydraulic Bay Thrusters II"/>
<hardware slot="rig slot 1" type="Medium Rocket Fuel Cache Partition II"/>
<hardware qty="1" slot="cargo" type="Mobile Tractor Unit"/>
<hardware slot="subsystem slot 1" type="Tengu Defensive - Amplification Node"/>
<hardware slot="subsystem slot 2" type="Tengu Offensive - Accelerated Ejection Bay"/>
<hardware slot="subsystem slot 3" type="Tengu Propulsion - Fuel Catalyst"/>
<hardware qty="1" slot="cargo" type="Tengu Core - Electronic Efficiency Gate"/>
<hardware slot="subsystem slot 0" type="Tengu Core - Augmented Graviton Reactor"/>

It is an old fitting so I don't know if it is still good. I would like to have references for ship fitting like this Tengi or Raven.

Any hekp would be appreciated. Thank you.

[Sanctia Vitae]

Both are going to be quite a different experience, not to mention the Uni's Incursion group now runs with armor.

I can help with missions, at least. While a T3C can run L4s, it can be a little tricky if you've been away for a while. I would recommend grabbing a simple Raven fit with an XL booster, two rat-spec hardeners and a multi-spec, and getting a feel for the missions themselves. Based on your Tengu fit (and the fact you have one fit as such), you likely know your way around a bit. Just get a feel for the missions themselves and how to run them should click. The one issue I could see you encountering is the engagement range in L4s. A number of them put your rats at least 80km out.